[2 Pack] Polyurethane Seam Sealer Automotive Compound — Paintable Auto Body Seam Sealer White, Won't Shrink or Crack, Flexible Joint Filler for Bare & Painted Metal, RV Roof Sealant with Gloves, 10oz

2 Pack Value! Superior Seal for Unparalleled Performance For a quick fix with lasting hold, turn to this automotive sealant to get the job done right. Properly patching voids demands durability. Set it and forget it with a body sealer that is non-shrinking, non-cracking, and low-odor. Incredibly versatile, this auto body seal compound can be used on any bare, primed, or painted surface. This auto sealant can fill all interior or exterior seams and joints. From wheel wells to door panels, from floor pans to drip rails and more. This adhesive does it all. Power through your project with this automotive body panel adhesive kit. Directions: Primer or Painted Surface - Clean with a VOC-compliant cleaner and scuff using an abrasive pad - Re-clean to remove debris before applying the seam sealer auto body compound - Pierce the seal, install the nozzle, then remove the metal seal - Insert the poly urethane adhesive sealant into a caulking gun and trim the nozzle - Apply the seam binding compound and tool it to achieve the desired finish - Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting Weld Through - Strip coatings around the weld flanges - Apply the auto body seam sealer and brush to cover all bare metal - Align and use a shunt clamp to hold before starting to weld Bare Metal - Clean with a VOC-compliant cleaner and grind or scuff weld nuggets or locations - Re-clean to remove debris before applying the automotive panel bond adhesive compound - Pierce the seal, install the nozzle, then remove the metal seal and trim the nozzle - Apply the paintable seam sealer and tool it to achieve the desired finish - Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting Additional Instructions: Seam seal compound requires an ambient temperature of

• PROFESSIONAL AUTOMOTIVE SEAM SEALER — WON'T SHRINK OR CRACK — Polyurethane formula seals body panel seams, weld joints, and gaps with a durable, flexible compound that stays put. Unlike generic fillers, this seam sealer maintains flexibility through temperature extremes and road vibration without cracking or pulling away.
• PAINTABLE IN 30 MINUTES — Apply, wait 30 minutes, and paint right over it. Fast cure time means you can prime and topcoat the same day — no overnight wait between seam sealing and painting. Accepts all automotive primers and topcoats.
• BONDS TO BARE, PRIMED & PAINTED METAL — Adheres equally well to bare steel, primed surfaces, and already-painted panels. No special surface preparation beyond basic cleaning. Also bonds to fiberglass and composite panels for complete auto body restoration work.
• 2-PACK WITH GLOVES — STANDARD CAULKING GUN COMPATIBLE — Two 10 oz cartridges provide enough seam sealer for full panel or floor pan restoration. Loads into any standard caulking gun for controlled bead application. Includes nitrile gloves for clean handling.
• AUTO BODY, RV & MARINE APPLICATIONS — Use as an automotive seam sealer, RV roof sealant, or marine joint compound. Seals truck bed seams, rocker panels, door jambs, wheel wells, floor pans, and undercarriage joints. Waterproof and weather resistant once cured.