uxcell Brass Misting Nozzle - 10/24 UNC 0.1mm and 0.15mm Orifice Dia Replacement Heads for Outdoor Cooling System - 20in1 Set

This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect.It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place. The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required. This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging. Specification:Material: Brass, Stainless steelThread size: UNC 10-24Orifice Diameter: 0.1mm / 0.004"Pressure: 35-70 kg/cmFlow Rate: 10-30 ml/minTotal Size: 9.5mm x 9mm / 0.37" x 0.35" (Max.D*H)Orifice Diameter: 0.15mm / 0.008"Pressure: 18-70 kg/cmFlow Rate: 20-50 ml/minTotal Size:9.5mm x 9mm / 0.37" x 0.35" (Max.D*H) Package Content:10 x 0.1mm Misting Nozzles10 x 0.15mm Misting Nozzles

• [TECHNICAL PARAMETERS] - 0.004" (0.1mm) orifice diameter, 35-70kg working pressure, 10-30ml/min flow rate. Brass material
• [TECHNICAL PARAMETERS] - 0.008" (0.15mm) orifice diameter, 18-70kg working pressure, 20-50ml/min flow rate. Brass material
• [EASY TO INSTALL] - Easily screw into any 10/ 24 UNC threaded mist nozzle opening
• [LEAK-PROOF] - Self-sealing o-ring included with each nozzle, no tape or sealant is required.
• [WIDELY USED] - Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, small fountain, etc.